Demeter Compulator Pro Effects Pedal V2
Operation is fairly straightforward. There are two inputs on the front side of the unit: a 1/4" input jack on the right and a1/4" output jack on the left. The battery-power switch is on the input Jack.
There are four controls on the unit-Compress and Volume, plus a foot switch to bypass the effect, and an LED to indicate effect operation. On the side there is Boost switch and a trim pot to set the Boost gain of the unit.
Attack: Sets the speed at which the Compressor will start gain reduction. The fastest setting is 1 millisecond, the slowest 100milliseconds.
Release: Sets the time the Gain reduction will stay on. The fastest setting is 100 mil-liseconds, slowest 10 seconds. Compress: affects the amount of Gain reduction (compression) of the input signal. Turning this clock wise will give you up to 30dB of gain reduction (depending on input gain). Please note that the Compulators normal gain is 12dB. In the boost mode max gain is 24dB (SEE Trim Pot). In some circumstance if you instrument is very hot you could achieve less than unity gain if you turn up the compress knob too much.
Volume: increases and decreases the output volume of the Compulator use this for level matching between the effected and unaf-fected signal. Volume increases and decreases the output volume of the Compulator. Use this for level matching between the affected and unaffected signal.
Boost Switch: Turns on the preset gain weaker signals or for very heavey compres-sion.
List Price: $ 299.00
Price: $ 299.00
